Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 5 Next »


Manual update for Semi-integrated

If Auto-update failed or was off for a semi-integrated terminal, these steps must be followed on the device to update all applications and parameters.

If Auto-Update was successful, you’re all set for semi-integrated. Please use this article to confirm the status of all of your terminal upgrades Auto-Update SUCCESS verification

Please follow all relevant steps below to update your Semi-integrated TSYS application.

1. From the home page of the terminal select the Apps icon.

2. Select Settings.

3. Enter the Administrator password (Default: 1234567).

4. Select PosSettings under the Devices sub-heading.

5. Select Update from TMS.

6. Select the Settings icon.

7. Verify the Terminal ID and Server Address.

7-A. Terminal ID:
(Terminal's Serial Number)

8. Press Back.

 

9. Select Check for Updates.

Check for Updates - Downloading

10. Once the download is completed, press OK.

11. Select Install for Install Software Updates.

12. Select Install for each application - start with the payment application. (TSYS)

13. Press Next or scroll down.

14. Press Install.

Payment Application
(TSYS BaseApp) Installing

15-A. (Option 1)
To install multiple applications, press Done.

15-B. (Option 2)
To install the payment application only, press Open.

Note: This is the last step for payment app only installations.

Integrated solutions - continue below.


Agent Installation

Install the Agent integration application.

  1. Press

Next or scroll down.

  1. Press

Install.

Agent Installation Successful

  1. Press

Open.

  1. Press

Refresh icon to start the Agent Service.

Start Agent Service Successful

 

 


Connect Installation

Install the Connect integration application.

  1. Press

Install.

Connect Installation Successful

  1. Press

Done.

 

 


Initialize Payment Application (BaseApp)

Open the Payment Application, allow it to initialize, close, and then reboot.

  • No labels